Na'urar tace gilashin Nustsche mai sikelin matukin jirgi
Tsarin Tsarin Nau'in "#" | Murfin Reactor Mai Gyaran Kaya & Babban Jiki (GFR)
● Tsarin Tsarin "#" Nau'in "#", kiyaye cikakken daidaiton kayan aiki.
● Babu Tashar Fitar da PTFE Mai Rage Fitarwa ta Matattu, ta hanyar haɗin sauri na bututun PTFEkwalbar karɓa.
● An ƙera Kwalbar Karɓa da kuma Mai Rarraba Tacewa daban-daban, wanda hakan ke adana ƙarin sararin aiki.
● Kayan Aikin Magudanar Ruwa Mai (Oil Drain Manifold Kit) kawai yana zubar da ruwan mai zagayawa ba tare da ya fesa ba kuma yana rage matsin lamba akan kayan gilashin reactor.
● Tashoshin zagayawa suna da tangential wanda ke hana zafi fiye da kima a gida, musamman kusa da tashoshin zagayawa. Zoben da ke cikin layin zafi yana inganta saurin sauyawar zafi da rarrabawar zafin jiki iri ɗaya. (Zaɓi ne don lita 10-50).
● Cikakken Tsarin Jaket, jaket ɗin zafi yana rufe cikakken jirgin ruwa na aikin wanda ke ba da damar canja wurin zafi mafi girma ga aikin. (Zaɓi ne don lita 10-30).
Nau'in "H" Tsarin Reactor | Babban Jiki Ana iya Ɗagawa & Juyawa Mai Juyawa (Juyawa Tsaye) (GFR-T)
● Tsarin Tsarin Nau'in "H", ba wai kawai yana kiyaye kwanciyar hankali ba, har ma yana adana sarari sosai.
● Na'urar Reactor na Tsarin "H", ana iya ɗaga babban jikin tare da juyawar 400mm & Juyawa ta Tilting 180° (Juyawa a Tsaye); Ya dace da fitar da kayan da ke da ɗanko sosai, lu'ulu'u, kayan da ke da ƙarfi da tsaftacewa.
Tsarin Tsarin Nau'in "H" | Ana iya ɗaga murfin Reactor | Babban Jiki na iya zama Juyawa Mai Juyawa (Juyawa Tsaye) (GFR-LT)
Ana iya ɗaga murfin Reactor ta atomatik, ba tare da motsa injin ba, faifan juyawa da sauran sassan da ke tashi zuwa babban jiki, ana iya juya Babban Jikin Reactor da 180°.
| Samfuri | Tsayin Reaktor | An ɗaga Murfi | Bayan An Ɗaga |
| GFR-10LT | 1205 | 840 | 2045 |
| GFR-20LT | 1515 | 900 | 2415 |
| GFR-30LT | 1755 | 950 | 2705 |
| GFR-50LT | 2390 | 1080 | 3470 |
Cikakken Tsarin Jakar Jaka
Cikakken Tsarin Jaket, jaket ɗin zafi yana rufe cikakken jirgin ruwa wanda ke ba da matsakaicin canja wurin zafi ga aikin. (Zaɓi don 10-50L)
Module na Tacewa na PTFE
● Zoben O-Zobe Mai Rufi na PTFE
● Gaskets na PTFE tare da zaren sukurori na waje
● Gaskets ɗin PTFE masu faɗi
● membrane / masana'anta na PTFE (ba a haɗa shi da tsoho ba)
● Faifan Gilashi ko allon PTFE mai ramuka
● Baseboard na PTFE tare da zaren sukurori na ciki
● Bawul ɗin Fitar da Gilashi na PTFE da Gilashi
● Kekunan Ɗagawa/Motsi
● Bututun PTFE
● Kwalbar Karɓar Gilashi
Faifan Gilashi
Kwamitin PTFE tare da ramuka
Trolley na ɗagawa/Motsi na Hydraulic don sauƙin shigarwa ko wargaza Module ɗin Tacewa. (Zaɓi ne)
Motar juyawa
Motar DC mara gogewa | Motar AC mai rage kayan aiki | Motar EX DIIBT4 Mai Tabbatar da Fashewa | Motar Iska
Kayan Haɗa Haɗewa
Hatimin PTFE + na yumbu | Nau'in ƙwaya biyu na yumbu, Babu ɓarna | Cikakken kwanciyar hankali ba tare da juyawa a cikin babban gudu ba.
Sanda Mai Juyawa na PTFE
Unibody SUS304 An rufe shi da PTFE Stirring Rod da Impeller Babu Gurɓatawa | Zaɓuɓɓuka da yawa don Impellers Nau'in Anga na PTFE, Nau'in Pitched Paddle, Nau'in Firam.
Babban Jikin Reactor
Layer Guda ɗaya/Biyu/Uku | Na'urar Haɗa Bakin Karfe | Silinda mai siffar ...
Tiyo Haɗin Rufi
Kare Jirgin Ruwan Reactor | Rage Damuwa a Kan Jirgin Ruwan Reactor | Kawai Zubar da Ruwan Mai Zagayawa Ba Tare da Fesawa Ba
Fitar da Bawul ɗin caji
Tsarin mallaka, Babu Zamewa, Babu Zubewa | Babu Sararin Matattu | Tashar Fitar da Ruwa Mai Karkatarwa ta faɗaɗa zuwa 35mm
| Samfura* | GFR-10 | GFR-20 | GFR-30 | GFR-50 | GFR-100 | GFR-150 | GFR-200 |
| ①Zaɓi | GFR-10T | GFR-20T | GFR-30T | GFR-50T | ‒ | ‒ | ‒ |
| GFR-10LT | GFR-20LT | GFR-30LT | GFR-50LT | ‒ | ‒ | ‒ | |
| Kayan Gilashi | Gilashin Borosilicate Mai Girma 3.3 | ||||||
| Tsarin Tsarin | Tsarin Tsarin Nau'in "#" ko "H" | Tsarin Tsarin Nau'in "#" | |||||
| Sassan da aka jika | Gilashi da PTFE ba tare da Gurɓatar Karfe ba | ||||||
| Ƙarfin Reactor | 10L | 20L | 30L | 50L | 100L | 150L | 200L |
| Nau'in jaket* | Bangon Sanyi a cikin Jaket ɗin Thermal | ||||||
| ②Zaɓi ne | Rigunan Zobe a cikin Jakar Thermal | ‒ | |||||
| Tsarin Jaket Mai Cikakke | Tsarin Jaket mara Cikakken Jaka | ||||||
| Girman Jaket ɗin Zafi | 3L | 6L | 9L | 15L | 30L | 45L | 60L |
| Yankin Tacewa | 363 cm² | 615 cm² | 615 cm² (1256 cm² An keɓance shi) | ||||
| Micron na tacewa | Micron: 0.2μm zuwa 200μm | ||||||
| Injin juyawa* | Motar AC Induction tare da Mai Rage Gear | ||||||
| 120W | 120W | 120W | 250W | 250W | 400W | 400W | |
| 50 ~ 600 RPM | |||||||
| ③Zaɓi ne | Motar Tabbatar da Fashewa ta Ex DIIBT4 | ||||||
| 180W | 180W | 180W | 250W | 370W | 750W | 750W | |
| 50 ~ 600 RPM | |||||||
| Haɗaɗɗen Sarrafa & Nuni | Saurin Juyawa/Zafin Kayan Aiki na Yanzu | ||||||
| Sandar juyawa | Unibody SUS304 mai rufi da PTFE Stirring Rod da Impeller | ||||||
| Mai Juyawa Impeller | Nau'in Anga na PTFE, Nau'in Paddle mai tsayi, Nau'in Firam | ||||||
| Hatimi don Agitator | PTFE + Yumbu Mai Haɗawa Biyu | ||||||
| Murfin Gilashi* | 265# | 340# | 340# (465# An keɓance shi) | ||||
| Buɗewa 7: ● Faɗuwar Mazubin Ciyarwa: 40/40 ● Ciyar da Kayan Aiki Masu Ƙarfi: Wuyan Flange 95# ● Mai juyawa: Wuyan Flange 60# ● Ciyar da ruwa: DN25 ● Binciken Zafin Jiki: DN25 ● Mai Rage Gurbin Mai Narkewa: S50/20 ● Sakin Matsi/Tashar Vacuum/shigar Gas: 34/34 ko /Tsaftace Feshi: Ma'aunin DN25 ko PH: 50# Wuyan Flange ko Wuyan Ultrasonic da aka Musamman | |||||||
| ④Zaɓi ne | ‒ | Buɗewa 8: ● Faɗuwar Mazubin Ciyarwa: 40/40 ● Ciyar da Kayan Aiki Masu Ƙarfi: Wuyan Flange 95# ● Mai juyawa: 60# Wuyan Flange ● Mai ciyar da ruwa DN25 ● Binciken Zafin Jiki: DN25 ● Mai Rage Gurbin Mai Narkewa: S50/20 ● Sakin Matsi/Tashar Iska/Shigar da Mai: 34/34 ● Tsaftace Feshi: Ma'aunin DN25 ko PH: 50# Wuyan Flange ko Wuyan Ultrasonic | |||||
| Mazubin Ciyar da Matsi Mai Tsanani* | Mazubin Ciyar da Layer ɗaya tare da bawul ɗin allurar PTFE da Hannu Mai Daidaita | ||||||
| 2000 ml | |||||||
| ⑤Zaɓi | 1) Mazubin Ciyar da Gilashi Mai Jaket 2) Mazubin Ciyar da Foda 3) Famfon Peristaltic ko Sauran Famfon Ma'auni Ciyarwa | ||||||
| Binciken Zafin Jiki | PT100 tare da Layer PTFE +/-1°C | ||||||
| Mai ɗaukar ma'ajiyar ruwa | Mai Sanyaya Na'urar Kwandon Na'ura Biyu | ||||||
| Wurin Sanyaya | 0.4 M² | 0.4 M² | 0.4 M² | 0.4 M² | 0.9 M² | 1.5 M² | 1.5 M² |
| Zafin Aiki | .-90°C zuwa +230°C | ||||||
| ΔT - Juriyar Girgizar Zafi | 90°C (Bangare Biyu), 60°C (Bangare Uku) | ||||||
| Matsi na Aiki | Cikakken Injin Tsaftacewa zuwa Matsi na Yanayi | ||||||
| Matsi na Jaket Mai Aiki | Har zuwa +0.5 mashaya (0.05 MPa) | ||||||
| Tushen wutan lantarki | 220~240V, 50Hz/60Hz ko kuma an keɓance shi | ||||||
| Bayani | ①GFR-10/50T, Ana iya ɗaga babban jikin Reactor & juyawar juyawa (Juyawa a tsaye 180°); Ana iya ɗaga murfin Reactor (Kayan Juya ko Reactor Mai Tsafta ba tare da Motar Mota ba, Juyawa Mai Juyawa da Bincike Raba; Babban Jiki Zai Iya Zama Juyawa Mai Juyawa (Juyawa Tsaye 180°) ②Ring Baffles a cikin Jaket ɗin Thermal Zaɓi ne na Zaɓi don Reactor na 10 ~ 50L; Musamman ga Tsarin Kula da Zafin Jiki Mai Kyau; Tsarin cikakken jaket yana samuwa ne kawai don Reactor mai ƙarfin lita 10 ~ 30. ③Motar da ke motsawa, Motar da ke Tabbatar da Fashewa zaɓi ne na haɓakawa. Don kayan da ke da ƙamshi mai yawa, ana iya haɓaka su zuwa injinan 550W 750W da 1500W masu ƙarfi. ④8 Buɗewa an keɓance su da zaɓi don 30 ~ 200L. ⑤Za a iya maye gurbin Mazubin Ciyar da Matsi na Kullum da: ● Mazubin Ciyar da Gilashi Mai Jaket; ● Mazubin ciyar da foda; ● Famfon Peristaltic ko Sauran Famfon Ma'aunin Ciyarwa | ||||||
