I-Pilot Scale Jacketed Nustsche Filtration Glass Reactor
Uhlobo lweSakhelo sesakhiwo se-“#” | Isiciko se-Reactor esiQinisekisiweyo kunye nomzimba oyintloko (i-GFR)
● Uhlobo lweSakhelo soLwakhiwo “#”, gcina uzinzo lulonke lwezixhobo.
● Akukho ndawo ifileyo ye-PTFE ethanda ukukhupha i-PTFE, ngokusebenzisa uqhagamshelo olukhawulezayo lwepayipi ye-PTFEiflaskhi yokufumana.
● I-Receiving Flask kunye ne-Filtration Reactor ziyilwe ngokwazo, zigcina indawo engakumbi yokusebenza.
● I-Oil Drain Manifold Kit ikhupha nje ulwelo lwe-circulator ngaphandle kokutshiza kwaye inciphise uxinzelelo kwiiglasi ze-reactor.
● IiPolo zokujikeleza kwegazi zi-tangential ezithintela ubushushu obugqithisileyo bendawo, ingakumbi kufutshane neePolo zokujikeleza kwegazi. IiRing Baffles ngaphakathi komaleko wobushushu ziphucula utshintsho olukhawulezayo lobushushu kunye nokusasazwa kobushushu obufanayo. (Ukhetho lwe-10-50L).
● Uyilo lweJacket epheleleyo, ijacket yobushushu igubungela ngokupheleleyo isitya senkqubo esinika ukudluliselwa kobushushu okuphezulu kwinkqubo. (Ukhetho lwe-10-30L).
Uhlobo lwe-“H” I-Struction Frame Reactor | Umzimba Oyintloko Ungaphakanyiswa kwaye Ujikelezise (Ujikelezo Oluthe Tye) (GFR-T)
● Isakhelo seSakhiwo sohlobo lwe-"H", asigcini nje ngokugcina uzinzo, kodwa sikwagcina nendawo kakhulu.
● Uhlobo lwe-"H" Frame Frame Reactor, umzimba oyintloko unokuphakanyiswa nge-400mm kunye ne-Tilting Rotation 180° (Vertical Rotation); Ilungele ukukhupha izinto ezixineneyo, ikristale, izinto eziqinileyo kunye nokucoca
Isakhelo soBume bohlobo lwe-“H” | Isiciko seReactor sinokuphakanyiswa | Umzimba oPhambili unokujikajika (Ukujikeleza okuthe nkqo)(GFR-LT)
Isiciko seReactor singaphakanyiswa ngokuzenzekelayo, ngaphandle kokuhambisa i-motor, i-paddle yokushukumisa kunye nezinye iindawo ezinyukayo ziye emzimbeni oyintloko, i-Reactor Main Body ingajikeleziswa nge-180°.
| Imodeli | Ukuphakama kweReactor | Isiciko Siphakanyisiwe | Emva kokuphakanyiswa |
| I-GFR-10LT | 1205 | 840 | 2045 |
| I-GFR-20LT | 1515 | 900 | 2415 |
| I-GFR-30LT | 1755 | 950 | 2705 |
| I-GFR-50LT | 2390 | 1080 | 3470 |
Uyilo olupheleleyo lweJakethi
Uyilo olupheleleyo lweJacket, ijacket yobushushu igubungela ngokupheleleyo isitya senkqubo esinika ukuhanjiswa kobushushu okuphezulu kwinkqubo. (Ungakhetha i-10-50L)
Imodyuli yokucoca ye-PTFE
● I-O-Ring egqunywe yi-PTFE
● Iigasket zePTFE ezinentambo yangaphandle yesikrufu
● Iigaskets zePTFE ezisicaba
● I-membrane ye-PTFE / ilaphu (ayifakwanga ngokwesiqhelo)
● Ibhodi yeDisiki yeGlasi okanye yePTFE enemingxuma
● Ibhodi yesiseko ye-PTFE enentambo yangaphakathi yesikrufu
● I-PTFE kunye neValve yokukhupha iGlasi
● Itroli yokuphakamisa/yokuhambisa
● Iityhubhu zePTFE
● Iflaski Yokufumana Iglasi
Idiski yeglasi
Ibhodi ye-PTFE enemingxuma
Itroli yokuphakamisa/yokuHamba ngeHydraulic ukuze kube lula ukuHlunga Ukufakela okanye ukuQhawula iModyuli. (Uyazikhethela)
Injini yokuHlaziya
Imoto engenabhrashi ye-DC | Imoto yokungenisa i-AC ene-Gear Reducer | Imoto yoBungqina bokuqhuma ye-EX DIIBT4 | Imoto yoMoya
Iikhithi zokutywina zokuxuba
I-PTFE + Ukuvalwa kweeBearing zeCeramic | IiBearing ezimbini zeCeramic, Akukho Nto iNgcolileyo | Uzinzo olugqibeleleyo ngaphandle kokujika kwi-High Speed Stirring.
Intonga yokuxuba ye-PTFE
I-Unibody SUS304 egqunywe yi-PTFE Stirring Rod kunye ne-Impeller Akukho Ngcoliseko | Ukhetho oluninzi lwee-Impellers Uhlobo lwe-PTFE Anchor, Uhlobo lwe-Pitched Paddle, Uhlobo lweSakhelo.
Umzimba oPhambili weReactor
Ileya enye/ezimbini/ezithathu |Intsimbi engatyiwayo exutyiweyo | Engqukuva | Isilinda
Umbhobho woQhagamshelo lwe-Insulation
Khusela isitya seReactor | Nciphisa uxinzelelo kwisitya seReactor | Ukukhupha nje ulwelo lweCirculator ngaphandle kokutshiza
Ivalvu Yokukhupha
Uyilo olunelungelo lobunikazi, Akukho kutyibilika, Akukho kuvuza | Akukho ndawo ifileyo | Izibuko lokukhupha elinomlinganiselo ophakanyisiweyo landiswe laya kwi-35mm
| Imodeli* | I-GFR-10 | I-GFR-20 | I-GFR-30 | I-GFR-50 | I-GFR-100 | I-GFR-150 | I-GFR-200 |
| ①Onganyanzelekanga | I-GFR-10T | I-GFR-20T | I-GFR-30T | I-GFR-50T | ‒ | ‒ | ‒ |
| I-GFR-10LT | I-GFR-20LT | I-GFR-30LT | I-GFR-50LT | ‒ | ‒ | ‒ | |
| Izinto zeglasi | Iglasi yeBorosilicate ephezulu 3.3 | ||||||
| Ulwakhiwo lwesakhelo | Isakhelo seSakhiwo sohlobo "#" okanye "H" | Uhlobo "#" Isakhelo seSakhiwo | |||||
| Iindawo ezimanzi | Iglasi kunye ne-PTFE ngaphandle kongcoliseko lwesinyithi | ||||||
| Umthamo weReactor | 10L | 20L | 30L | 50L | 100L | 150L | 200L |
| Uhlobo lweJakethi* | Udonga oluthambileyo ngaphakathi kweJacket yobushushu | ||||||
| ②Onganyanzelekanga | IiRing Baffles ngaphakathi kwiThermal Jacket | ‒ | |||||
| Uyilo lweJacket epheleleyo | Uyilo OlungenaJacket Epheleleyo | ||||||
| Umthamo weJakethi yoBushushu | 3L | 6L | 9L | 15L | 30L | 45L | 60L |
| Indawo yokuhluza | 363 cm² | 615 cm² | 615 cm² (1256 cm² Yenzelwe wena) | ||||
| I-Micron yokucoca | I-Micron: 0.2μm ukuya kwi-200μm | ||||||
| Injini yokuHlaziya* | Imoto yokungenisa i-AC ene-Gear Reducer | ||||||
| 120W | 120W | 120W | 250W | 250W | 400W | 400W | |
| 50 ~ 600 RPM | |||||||
| ③Ukhetho | Imoto Engqina Ukuqhuma kwe-Ex DIIBT4 | ||||||
| 180W | 180W | 180W | 250W | 370W | 750W | 750W | |
| 50 ~ 600 RPM | |||||||
| Ulawulo oluDibeneyo kunye noBoniso | Isantya sokuHlanganisa/Ubushushu beZixhobo zangoku | ||||||
| Intonga yokuxukuxa | I-Unibody SUS304 egqunywe yi-PTFE Stirring Rod kunye ne-Impeller | ||||||
| I-Impeller evuselelayo | Uhlobo lwe-PTFE Anchor, Uhlobo lwePaddle oluPitched, Uhlobo lweSakhelo | ||||||
| Ukutywina kwe-Agitator | Utywino oluphindwe kabini lwe-PTFE + Ceramic Bearing | ||||||
| Isiciko seglasi* | 265# | 340# | 340# (465# Yenzelwe wena) | ||||
| Iindawo ezi-7 ezivulekileyo: ● I-Downing Feeding Funnel: 40/40 ● Ukutya Izinto Eziqinileyo: 95# Intamo Yesiflengi ● Umxube: 60# Intamo yeFlange ● Ukondla ngolwelo: DN25 ● Uvavanyo lobushushu: DN25 ● I-Reflux yeCondenser: S50/20 ● Ukukhululwa koxinzelelo/Isango leVacuum/Ukungena kwegesi: 34/34 okanye /Ukucoca ngeSpray: Umlinganiselo we-DN25 okanye we-PH: 50# Intamo yeFlange okanye iNntamo yeUltrasonic eyenziwe ngokwezifiso | |||||||
| ④Okukhethwayo | ‒ | Iindawo ezi-8 ezivulekileyo: ● I-Downing Feeding Funnel: 40/40 ● Ukutya Izinto Eziqinileyo: 95# Intamo Yesiflengi ● Umxube: 60# Intamo yeFlange ●Ukutya ulwelo DN25 ● Uvavanyo lobushushu: DN25 ● I-Reflux yeCondenser: S50/20 ● Ukukhululwa koxinzelelo/Izibuko leVacuum/Ukungena kwegesi: 34/34 ● Ukucoca ngeSpray: Umlinganiselo we-DN25 okanye we-PH: 50# Flange Neck okanye i-Ultrasonic Neck | |||||
| I-Funnel yokutya ephuma kuxinzelelo rhoqo* | I-Single Layer Dropping Feeding Funnel ene-PTFE Needle Valve kunye ne-Equalizing Arm | ||||||
| 2000 ml | |||||||
| ⑤Okukhethwayo | 1) I-Funnel Yokondla Ngeglasi Enejakethi 2) I-Funnel Yokondla Ngomgubo 3) I-Peristaltic Pump okanye Ezinye Iimpompo Zokulinganisa Ukutya | ||||||
| Iprobe yobushushu | I-PT100 ene-PTFE Layer +/-1°C | ||||||
| Isikhondensi | Ikhoyili yokupholisa kabini | ||||||
| Indawo Yokupholisa | 0.4 M² | 0.4 M² | 0.4 M² | 0.4 M² | 0.9 M² | 1.5 M² | 1.5 M² |
| Ubushushu bokusebenza | .-90°C ukuya ku +230°C | ||||||
| ΔT - Ukumelana noTshabalalo oluTshisayo | 90°C (Udonga Oluphindwe Kabini), 60°C (Udonga Oluthathu) | ||||||
| Uxinzelelo Lokusebenza | I-Vacuum epheleleyo ukuya kuxinzelelo lomoya | ||||||
| Uxinzelelo lweJakethi yokuSebenza | Ukuya kuthi ga kwi +0.5 bar (0.05 MPa) | ||||||
| Ukunikezwa Amandla | 220~240V, 50Hz/60Hz okanye eyenziwe ngokwezifiso | ||||||
| Ingxelo | ①GFR-10/50T, Umzimba oPhambili weReactor unokuPhakanyiswa kwaye uTyibilikise ujikelezo (Ujikelezo oluthe nkqo 180°); Isiciko se-GFR-10/50LT, i-Reactor Lid singaphakanyiswa (Izinto zokulahla okanye i-Reactor ecocekileyo ngaphandle kweMoto eHambayo, Iphedi yokuxukuxa kunye neProbe eyahlukileyo); Umzimba oPhambili unokuba yiTyibilikisi yokujikeleza (Ukujikeleza okuthe nkqo nge-180°) ②I-Ring Baffles ngaphakathi kwi-Thermal Jacket lukhetho olukhethiweyo kwi-10~50L Reactor; Ingakumbi kwiNkqubo yoLawulo loBushushu obuPhezulu; Uyilo lweJacket epheleleyo lufumaneka kuphela kwiReactor eyi-10~30L. ③Imoto Evuselelayo, Imoto Engqina Ukuqhuma Lukhetho Lokuphucula. Kwizinto ezixineneyo nezinobuqhophololo, zingaphuculwa zibe ziiMoto ezinamandla aphezulu ezingama-550W, 750W kunye ne-1500W. ④8 Iimbobo zenziwe ngokwezifiso ukuba zingabi ngaphezu kwama-30 ~ 200L. ⑤I-Constant Pressure Drop Feeding Funnel ingathathelwa indawo yile: ● I-Funnel Yokondla Iglasi Enejakethi; ● I-Funnel Yokondla Ngomgubo; ● I-Peristaltic Pump okanye ezinye iiMetering Pumps | ||||||
