I-Pilot Scale Jacketed Nustsche Filtration Glass Reactor
Uhlobo “#” Uhlaka Lokwakheka | Isembozo Se-Reactor Esilungisiwe kanye Nomzimba Oyinhloko (GFR)
● Uhlobo “#” Uhlaka Lokwakheka, gcina ukuzinza okuphelele kwemishini.
● Akukho Dead Space PTFE Imbobo Yokukhipha Ethanda Ukuthambekela, ngokuxhumeka okusheshayo kwepayipi le-PTFEiflaski yokwamukela.
● I-Receiving Flask kanye ne-Filtration Reactor zakhiwe ngokuzimela, zisindisa isikhala esiningi sokusebenza.
● I-Oil Drain Manifold Kit imane ikhiphe uketshezi lwe-circulator ngaphandle kokuchaphaza futhi inciphise ukucindezeleka ezingilazini ze-reactor.
● Ama-Circulation Ports athinta kakhulu agwema ukushisa ngokweqile endaweni, ikakhulukazi eduze kwama-circulation ports. Ama-Ring Baffles ngaphakathi kwengqimba yokushisa athuthukisa ukuguquka okusheshayo kokushisa kanye nokusatshalaliswa kokushisa okufanayo. (Ongakukhetha ngo-10-50L).
● Idizayini Egcwele Yejakhethi, ijakhethi yokushisa imboza ngokuphelele isitsha senqubo esinikeza ukudluliselwa kokushisa okuphezulu enqubweni. (Ongakukhetha ngamalitha ayi-10-30).
I-"H" Uhlobo Lokwakheka Kwesakhiwo Se-Reactor | Umzimba Oyinhloko Ungaphakanyiswa Futhi Uthambekele Ekujikelezeni (Ukuzungeza Okuqondile) (GFR-T)
● Uhlaka lwesakhiwo sohlobo lwe-"H", alugcini nje ngokugcina ukuzinza, kodwa futhi lugcina isikhala kakhulu.
● I-"H" Type Struction Frame Reactor, umzimba oyinhloko ungaphakanyiswa nge-400mm & Tilting Rotation 180° (Vertical Rotation); Ilungele ukukhipha izinto ezi-viscosity ephezulu, i-crystal, izinto eziqinile kanye nokuhlanza
Uhlaka Lokwakheka Kohlobo “H” | Isembozo Se-Reactor Singaphakanyiswa | Umzimba Oyinhloko Ungathambekela Ukujikeleza (Ukujikeleza Okuqondile)(GFR-LT)
Isembozo se-Reactor singaphakanyiswa ngokuzenzakalelayo, ngaphandle kokuhambisa injini, i-paddle yokuxuba nezinye izingxenye zikhuphukela emzimbeni oyinhloko, i-Reactor Main Body ingajikeleziswa ngo-180°.
| Imodeli | Ukuphakama kwe-Reactor | Isivalo Siphakanyisiwe | Ngemva Kokuphakanyiswa |
| I-GFR-10LT | 1205 | 840 | 2045 |
| I-GFR-20LT | 1515 | 900 | 2415 |
| I-GFR-30LT | 1755 | 950 | 2705 |
| I-GFR-50LT | 2390 | 1080 | 3470 |
Umklamo weJakethi Ogcwele
Idizayini yeJacket Egcwele, ijacket yokushisa imboza ngokuphelele isitsha senqubo esinikeza ukudluliselwa okuphezulu kokushisa enqubweni. (Ongakukhetha kwe-10-50L)
Imodyuli Yokuhlunga ye-PTFE
● Indandatho ye-O eboshwe nge-PTFE
● Ama-gasket e-PTFE anentambo yesikulufu yangaphandle
● Ama-gasket e-PTFE ayisicaba
● Ulwelwesi lwe-PTFE / indwangu (ayifakiwe ngokuzenzakalelayo)
● Ibhodi le-Glass Disc noma le-PTFE elinezimbobo
● Ibhodi lesisekelo le-PTFE elinentambo yesikulufu sangaphakathi
● I-PTFE kanye ne-Glass Discharge Valve
● I-Lifting/Movement Trolley
● Amapayipi e-PTFE
● Ibhodlela Lokwamukela Ingilazi
Idiski Yengilazi
Ibhodi le-PTFE elinezimbobo
I-Hydraulic Lifting/Movement Trolley ukuze kube lula ukufaka noma ukuqaqa iModule. (Ongakukhetha)
Injini Eshukumisayo
Imoto Engenamabhulashi ye-DC | Imoto Yokungenisa I-AC Ene-Gear Reducer | Imoto Evikela Ukuqhuma ye-EX DIIBT4 | Imoto Yomoya
Amakhithi Okuvala Okuxuba
I-PTFE + Ukuvalwa Kwebhere Le-Ceramic | Ukuthwala Okubili Kwe-Ceramic, Ukungcola Okungagqokwa | Ukuqina Okuphelele Ngaphandle Kokushukuma Okusheshayo.
Induku Yokushukumisa ye-PTFE
I-Unibody SUS304 Embozwe yi-PTFE Stirring Rod kanye ne-Impeller Akukho Ukungcola | Ukukhetha Okuningana Kwama-Impellers Uhlobo Lwe-PTFE Anchor, Uhlobo Lwe-Pitched Paddle, Uhlobo Lohlaka.
Umzimba Oyinhloko We-Reactor
Izendlalelo Ezilodwa/Ezimbili/Ezintathu |Insimbi Engagqwali Ehlanganisiwe | Eyisiyingi | Isilinda
Ipayipi Lokuxhuma Lokufaka Izinto Zokuvala Uthuli
Vikela Isitsha Se-Reactor | Nciphisa Ukucindezeleka Esitsheni Se-Reactor | Ukukhipha Uketshezi Lwe-Circulator Ngaphandle Kokuchitha
I-Valve Yokukhipha Ishaja
Umklamo Onelungelo Lobunikazi, Akukho Ukushelela, Akukho Ukuvuza | Isikhala Esifile Esingenalutho | Ichweba Lokukhipha Elinciphile landa laya ku-35mm
| Imodeli* | I-GFR-10 | I-GFR-20 | I-GFR-30 | I-GFR-50 | I-GFR-100 | I-GFR-150 | I-GFR-200 |
| ①Ongakukhetha | I-GFR-10T | I-GFR-20T | I-GFR-30T | I-GFR-50T | ‒ | ‒ | ‒ |
| I-GFR-10LT | I-GFR-20LT | I-GFR-30LT | I-GFR-50LT | ‒ | ‒ | ‒ | |
| Izinto Zengilazi | Ingilazi ye-Borosilicate Ephakeme 3.3 | ||||||
| Isakhiwo Sohlaka | Uhlobo "#" noma "H" Uhlaka Lwesakhiwo | Uhlobo "#" Uhlaka Lwesakhiwo | |||||
| Izingxenye Ezimanzi | Ingilazi ne-PTFE ngaphandle kokungcola kwensimbi | ||||||
| Amandla e-Reactor | 10L | 20L | 30L | 50L | 100L | 150L | 200L |
| Uhlobo lweJakethi* | Udonga Oluthambile ngaphakathi kweJacket Yokushisa | ||||||
| ②Ongakukhetha | Ama-Ring Baffles ngaphakathi kwe-Thermal Jacket | ‒ | |||||
| Umklamo weJacket Egcwele | Umklamo Ongagcwele Ijazi | ||||||
| Ivolumu yejakethi yokushisa | 3L | 6L | 9L | 15L | 30L | 45L | 60L |
| Indawo Yokuhlunga | 363 cm² | 615 cm² | 615 cm² (1256 cm² Ngokwezifiso) | ||||
| I-Micron yokuhlunga | I-Micron: 0.2μm kuya ku-200μm | ||||||
| Injini Yokushukumisa* | I-AC Induction Motor ene-Gear Reducer | ||||||
| 120W | 120W | 120W | 250W | 250W | 400W | 400W | |
| 50 ~ 600 RPM | |||||||
| ③Ongakukhetha | Imoto Evikela Ukuqhuma ye-Ex DIIBT4 | ||||||
| 180W | 180W | 180W | 250W | 370W | 750W | 750W | |
| 50 ~ 600 RPM | |||||||
| Ukulawula Okuhlanganisiwe Nokubonisa | Isivinini/Izinga lokushisa Lokushukumisa Kwamanje | ||||||
| Induku Yokuxubha | I-Unibody SUS304 Embozwe yi-PTFE Stirring Rod kanye ne-Impeller | ||||||
| I-Impeller Eshukumisayo | Uhlobo lwe-PTFE Anchor, Uhlobo lwe-Piddle olufakwe, Uhlobo lohlaka | ||||||
| Ukuvala uphawu lwe-Agitator | Ukuvalwa Okubili Kwe-PTFE + Ceramic Bearing | ||||||
| Isivalo Sengilazi* | 265# | 340# | 340# (465# Kwenziwe Ngokwezifiso) | ||||
| Izindawo ezi-7 zokuvula: ● I-Downing Feeding Funnel: 40/40 ● Ukondla Izinto Eziqinile: 95# Intamo Yesicaba ● Umshini Wokuxubha: Intamo Yesicaba Engu-60# ● Ukondla Okusaketshezi: DN25 ● Iphrobhu Yokushisa: DN25 ● I-Reflux ye-Condenser: S50/20 ● Ukukhishwa Kwengcindezi/Imbobo Yesivalo/Ukungena Kwegesi: 34/34 noma /Ukuhlanza Isifutho: Isilinganiso se-DN25 noma i-PH: 50# Intamo Yesibhakela noma Intamo Ye-Ultrasonic Eyenziwe Ngokwezifiso | |||||||
| ④Ongakukhetha | ‒ | Izindawo zokuvula eziyi-8: ● I-Downing Feeding Funnel: 40/40 ● Ukondla Izinto Eziqinile: 95# Intamo Yesicaba ● Umshini Wokuxuba: Intamo Yesicaba Esingu-60# ●Ukudla Okuketshezi DN25 ● Iphrobhu Yokushisa: DN25 ● I-Reflux ye-Condenser: S50/20 ● Ukukhishwa Kwengcindezi/Imbobo Yesivalo/Ukungena Kwegesi: 34/34 ● Ukuhlanza Isifutho: Isilinganiso se-DN25 noma i-PH: 50# Intamo yeFlange noma i-Ultrasonic Neck | |||||
| I-Funnel Yokuphakela Ukwehla Kokucindezela Okuqhubekayo* | I-Funnel Yokuphakela Eyenziwe Ngesendlalelo Esisodwa Ene-PTFE Needle Valve kanye ne-Equalizing Arm | ||||||
| 2000 ml | |||||||
| ⑤Ongakukhetha | 1) I-Funnel Yokuphakela Ngengilazi Enejakethi 2) I-Funnel Yokuphakela Ngophawuda 3) I-Peristaltic Pump noma Amanye Amaphampu Okulinganisa Ukudla | ||||||
| I-Temperature Probe | I-PT100 ene-PTFE Layer +/-1°C | ||||||
| I-Condenser | Ikhoyili Yokupholisa Kabili | ||||||
| Indawo Yokupholisa | 0.4 M² | 0.4 M² | 0.4 M² | 0.4 M² | 0.9 M² | 1.5 M² | 1.5 M² |
| Izinga Lokushisa Lokusebenza | .-90°C kuya ku-+230°C | ||||||
| I-ΔT - Ukumelana Nokushaqeka Okushisayo | 90°C (Udonga Oluphindwe Kabili), 60°C (Udonga Oluthathu) | ||||||
| Ingcindezi Yokusebenza | I-Vacuum Egcwele Kungcindezi Yomoya | ||||||
| Ingcindezi Yejazi Lokusebenza | Kufika kubha engu-+0.5 (0.05 MPa) | ||||||
| Ukunikezwa kwamandla kagesi | 220~240V, 50Hz/60Hz noma ngezifiso | ||||||
| Isaziso | ①GFR-10/50T, Umzimba Oyinhloko We-Reactor Ungaphakanyiswa Futhi Ujikelezise (Ukujikeleza Okuqondile 180°); I-GFR-10/50LT, Isivalo Se-Reactor Singaphakanyiswa (Izinto Zokulahla Noma I-Reactor Ehlanzekile Ngaphandle Kwemoto Ehambayo, I-Paddle Exubayo kanye ne-Probe Ehlukile); Umzimba Oyinhloko Ungajika Ujikeleze (Ukujikeleza Okuqondile okungu-180°) ②Ama-Ring Baffles ngaphakathi kwe-Thermal Jacket ayindlela ongayikhetha ye-Reactor engu-10~50L; Ikakhulukazi kwinqubo yokulawula izinga lokushisa elinembile kakhulu; Umklamo weJacket Egcwele Utholakala Kuphela weReactor engu-10 ~ 30L. ③Injini Evuselelayo, Injini Evikela Ukuqhuma Iyindlela Yokuthuthukisa. Ngezinto Eziqinile Ezinobukhulu, Zingathuthukiswa zibe yiMoto Ezinamandla Aphezulu Ezingu-550W 750W kanye ne-1500W. ④8 Izimbobo Zenziwe Ngokwezifiso Uma Ungazikhethela zona ezingama-30~200L. ⑤I-Constant Pressure Drop Feeding Funnel ingathathelwa indawo yilokhu: ● I-Funnel Yokuphakela Ingilazi Enejakethi; ● I-Funnel Yokuphakela Impuphu; ● Iphampu Yokumisa Noma Amanye Amaphampu Okulinganisa Ukudla | ||||||
